2 cable plug

[Pitschi]

Hi there,

I have 2 cables from the dizzy to connect the coil. These have a plug. Does anybody know the counterpart? part # etc.

Of course I just can cut it and connect it directly, but....

Thanks in advance.

Cheers
Pitschi

[stevieturbo]

Looks like an Econoseal

https://www.3waycomponents.co.uk/produc ... ctor-kits/

[GDCobra]

Just for your interest.
That doesn't look like the standard plug which, from my experience is a male/female bullet type connector (Lucas?). I don't think the standard connector is available any longer and this may have been changed to this type by a previous owner particularly if an aftermarket ignition amplifier was fitted (I did similar on mine). Changing the plug/socked and the ignition amplifier was probably a good thing, although obviously a shame to lose the Lucas quality!

I agree with Stevie T, that looks like econoseal.

[stevieturbo]

Just for your interest.
That doesn't look like the standard plug which, from my experience is a male/female bullet type connector (Lucas?). I don't think the standard connector is available any longer and this may have been changed to this type by a previous owner particularly if an aftermarket ignition amplifier was fitted (I did similar on mine). Changing the plug/socked and the ignition amplifier was probably a good thing, although obviously a shame to lose the Lucas quality!

I agree with Stevie T, that looks like econoseal.

I'd agree, Econoseal would be a bit modern for OEM Rover stuff I'd think.

Not that it matters, it's a cheap readily available connector.

[Pitschi]

Thanks you