how gutted am i
first start of the engine today with a rebuilt 3.5
oil relif valve seems to be stuck now
light went off first start then after i turned it over again the light stayed on
worst bit of all is the valley gaskets sprung a leak and its putting a puddle under the inlet manifold you can see it running out of the port next to cyl 2 at the front drivers side so that needs stripped
bonus is it runs
bit tight but it runs
strip it down again and THIS time it should be fine eh
rover v8 first start
Moderator: phpBB2 - Administrators
-
landybob_v8
- Helpful or Confused
- Posts: 123
- Joined: Thu Dec 14, 2006 5:09 pm
rover v8 first start
v8's everywhere at least the one in the spare bedrooms gone now
mrs happy again
mrs happy again
-
landybob_v8
- Helpful or Confused
- Posts: 123
- Joined: Thu Dec 14, 2006 5:09 pm
