Bolting Engine To Stand.........

cmillson · Post by **cmillson** » Sat Feb 17, 2007 9:07 pm

I wonder if anyone can help. I am trying to find the diameter and thread form of the bolts used to bolt the bellhousing to the rover v8 block, as they are the mounting points of my stand...........

Thanks in advance,

Chris

mgbv8 · Post by **mgbv8** » Sat Feb 17, 2007 9:11 pm

5/16 UNC if my memory is working ok.

stevieturbo · Post by **stevieturbo** » Sat Feb 17, 2007 9:17 pm

3/8 UNC

For mounting to en engine stand, use the rocker bolts

cmillson · Post by **cmillson** » Sat Feb 17, 2007 9:34 pm

Excellent, thanks very much. You don't know how long the rocker bolts are off hand do you...........roughly......

stevieturbo · Post by **stevieturbo** » Sat Feb 17, 2007 10:06 pm

about 3-4" or so ?? Probably closer to 3"