clutch

poo slinger · Post by **poo slinger** » Mon Nov 17, 2008 8:48 pm

do rover v8's run off cable or hydrolic clutch?

ramon alban · Post by **ramon alban** » Mon Nov 17, 2008 8:55 pm

Hello Poo,

Hydraulics with a clutch master and slave cylinders

poo slinger · Post by **poo slinger** » Mon Nov 17, 2008 9:29 pm

damn, would that mean i have to change my pedal box or can i convert to cable?

topcatcustom · Post by **topcatcustom** » Tue Nov 18, 2008 8:40 am

With some ingenuity you could probably convert to cable but why would you want to?

kiwicar · Post by **kiwicar** » Tue Nov 18, 2008 3:44 pm

Several of the Ford owners have converted from a cable to Hydraulic using an adaptor box and a short cable from the existing pedel box, there are even some photos on here somwhere (I suspect in this section). Ask Ian Stewart or Tony.
Mike

JP. · Post by **JP.** » Tue Nov 18, 2008 4:49 pm

I have welded a bracked on the steering colum that holds the master just above the pedal in the Capri.
The fluid canister sits in the enginebay.

Normaly it puls the cable, now it pushes the master ( cause its above the pedal now)

poo slinger · Post by **poo slinger** » Tue Nov 18, 2008 6:37 pm

i mite just convert it then