Can anyone recommend a place to get an EFI inlet manifold ported?
It is a standard 4.6 inlet at the moment.
Any ideas of the average cost?
Inlet manifold porting
Moderator: phpBB2 - Administrators
-
CastleMGBV8
- Top Dog
- Posts: 2334
- Joined: Sat Aug 18, 2007 5:09 pm
- Location: Sidcup, Kent, UK
Antony.
V8 deveopments may do them or there is a gentleman on here who probably does them for a bit less, check out Eliot in the members list above, his website has a lot of data.
To make it wothwhile you need the trumpet base modified with larger trumpets together with an enlarged throttle body and it starts to get expensive..
Kevin.
V8 deveopments may do them or there is a gentleman on here who probably does them for a bit less, check out Eliot in the members list above, his website has a lot of data.
To make it wothwhile you need the trumpet base modified with larger trumpets together with an enlarged throttle body and it starts to get expensive..
Kevin.
