hiya all,
as i wont soon be running a dizzy, i've been looking for a straight thermostat housing to aid the water on way to the rad.
anyone know if one of these below would fit the rover v8....or anyone know of one like it that will fit.
Only other option is to mod the one i have and weld it back on straight...but the alloy on these is rubbish to weld.
cheers
scott richmond
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :IT&ih=004
striaght thermostat housing
Moderator: phpBB2 - Administrators
-
Seight-V8
- Knows His Stuff
- Posts: 559
- Joined: Sun Jul 01, 2007 10:12 am
- Location: https://t.me/pump_upp
- Contact:
-
CastleMGBV8
- Top Dog
- Posts: 2334
- Joined: Sat Aug 18, 2007 5:09 pm
- Location: Sidcup, Kent, UK
Scott,
I got my straight thermostat housing with the by-pass from the water pump from Dave Vale at V8 Conversions Farnborough Kent.
Tel. 01689 858716
There's a pic in the thread water leak just below.
Kevin.
I got my straight thermostat housing with the by-pass from the water pump from Dave Vale at V8 Conversions Farnborough Kent.
Tel. 01689 858716
There's a pic in the thread water leak just below.
Kevin.
Last edited by CastleMGBV8 on Sat Jun 21, 2008 9:16 pm, edited 1 time in total.
