how to test......

Jono FD3 · Post by **Jono FD3** » Sun Oct 14, 2007 6:55 pm

Guys... my rover 3.5 is over fueling like a pig (1/2 gallon in 5 mins @idle

)!!
It's running the flapper type injection system. so I was wondering if ther is a procedure to eliminate things, eg. fuel pressure reg, afm, etc.]

Also need to know how to test the componants to make shure they are opperating correctly!!

Cheers
Jono

Ian Anderson · Post by **Ian Anderson** » Sun Oct 14, 2007 8:15 pm

Sounds like it is in limp home mode (If theFlaper does that - I know the hotwire does)

To clear it
Disconnect the battery for 30 seconds and reconnect it then try again.

Ian

ChrisJC · Post by **ChrisJC** » Mon Oct 15, 2007 7:26 am

Flapper doesn't do that.

It sounds like the coolant temp sensor to me.

Ramon Albans site has loads of tech info. I thought he had the complete factory diagnostics procedure but I can't find it. I did find this though:

http://www.vintagemodelairplane.com/pag ... nts01.html

Chris.