Serpentine relief valve

General Chat About Engine Build

Moderator: phpBB2 - Administrators

Post Reply
Ray944
Newbie
Newbie
Posts: 7
Joined: Mon Nov 10, 2025 4:45 pm

Serpentine relief valve

Post by Ray944 »

Hi again everyone

Can anyone show me in what order the oil pressure relief valve fits in an intermediate serpentine front cover please. I cant seem to find any info anywhere and I don't want to guess ! Appreciate any help thanks

Ray.
paul c
Getting There
Getting There
Posts: 284
Joined: Tue Mar 11, 2008 7:41 am
Location: North Canterbury. New Zealand

Re: Serpentine relief valve

Post by paul c »

From memory, piston, spring then spring cup and retainer clip.
Ray944
Newbie
Newbie
Posts: 7
Joined: Mon Nov 10, 2025 4:45 pm

Re: Serpentine relief valve

Post by Ray944 »

Thanks Paul

Much Appreciated !

Ray
SuperV8
Guru
Guru
Posts: 999
Joined: Wed Jul 08, 2009 12:25 am
Location: West midlands

Re: Serpentine relief valve

Post by SuperV8 »

New Picture (1).jpg
frontcover7 oil pressure relief.jpg
frontcover7 oil pressure relief.jpg (36.61 KiB) Viewed 16 times
[/img]

edit# from the manual to add:

Oil pressure relief valve - inspection
1. Clean relief valve components and piston bore
in timing cover.
2. Check piston and bore for scoring and that
piston slides freely in bore with no perceptible
side movement.
3. Check relief valve spring for damage and
distortion; check spring free length:
Spring free length = 60.0 mm

Oil pressure relief valve - refit
1. Lubricate new ’O’ ring with engine oil and fit to
relief valve plug.
2. Lubricate relief valve spring, piston and piston
bore with engine oil.
3. Assemble piston to relief valve spring, insert
piston and spring into piston bore.
4. Fit relief valve plug, depress plug and fit circlip.
5. Ensure circlip is fully seated in groove.
Dax Rush 4.6 supercharged V8 MSII
Post Reply

Return to “Engines Area”