Search found 11 matches

by tonydancer8
Fri Aug 08, 2008 3:24 pm
Forum: Electrical & Ignition Area
Topic: dizzy wiring????
Replies: 2
Views: 1512

dizzy wiring????

I,ve gone through the forum to try and solve this wiring problem, cant find an answer and hope someone out there can. I have a 29 model A with rover v8 and i want to swap the Opus dizzy for a dm8.I have a new 12v coil and a intermotor amp and need a wiring diagram. there are 2 black wires coming out...
by tonydancer8
Tue Aug 28, 2007 6:06 pm
Forum: Engines Area
Topic: smoke!!!!!!! lots of it!!!!!
Replies: 18
Views: 9379

Wifes going to divorce me with the amount of time and bids I,m putting in.
Ebays ok, but I,d trust someone off here rather than ebay if they said it was ok.
Ta,
Tony
by tonydancer8
Tue Aug 28, 2007 6:04 pm
Forum: Engines Area
Topic: smoke!!!!!!! lots of it!!!!!
Replies: 18
Views: 9379

Thanks for the offer Mike, Got both edelbrock and offenhauser manifolds
so 4 barrel is the way to go.
Cheers again,
Tony
by tonydancer8
Sun Aug 26, 2007 10:23 am
Forum: Engines Area
Topic: smoke!!!!!!! lots of it!!!!!
Replies: 18
Views: 9379

Well done guys( and girls) last reply re vent pipe lead me to a kinked pipe that had been ramed down a hole in the inner wing, heads reskimmed, new oilrings fitted for nothing!!!!! thanks again and now its time to sort our rv8 dragster out! Carb knackered1 anyone got a holley for sale that they know...
by tonydancer8
Sun Aug 26, 2007 10:14 am
Forum: Engines Area
Topic: Crank case pressurisation?
Replies: 16
Views: 8732

just to confirm these coments, I was having smoke problems, see'lots of smoke thread' and it turned out to be a kinked breathewr pipe that someone had forced down by the inner wing. I,ve not run a rv8 before, so after a £600 rebuild bill and still no better, it was only due to the guys on this forum...
by tonydancer8
Sat Aug 25, 2007 6:43 pm
Forum: Engines Area
Topic: smoke!!!!!!! lots of it!!!!!
Replies: 18
Views: 9379

Thanks again for the replys, the crank I,m refering to the alternator belt was the later flat belt but according to the engine no its a 1994 r/rover 3.9
block.
cheers ,
Tony
by tonydancer8
Thu Aug 23, 2007 8:50 pm
Forum: Engines Area
Topic: smoke!!!!!!! lots of it!!!!!
Replies: 18
Views: 9379

BACK AGAIN!, drawn a blank with the smoking engine, so about to re-build one. Is there a differance between a early 3.9 crank and a 'serpentine' crank, or am i barking up the wrong drain pipe!
by tonydancer8
Wed Aug 08, 2007 5:56 pm
Forum: Engines Area
Topic: smoke!!!!!!! lots of it!!!!!
Replies: 18
Views: 9379

Thannks Chris, good thought, I,ll get engine no tomorrow and check oil capacity.
Thanks again,
Tony
by tonydancer8
Tue Aug 07, 2007 8:31 pm
Forum: Engines Area
Topic: smoke!!!!!!! lots of it!!!!!
Replies: 18
Views: 9379

thanks, everyone, comp test between 165 175, all valve stem oil seals changed on first head removal. Someone has suggested using 20/50 oil, but why should it have started after 2or 300 miles? will double check your ideas sat morning before taking engine out again!!!!!!! thanks again, Tony. ps as any...
by tonydancer8
Tue Aug 07, 2007 8:31 am
Forum: Engines Area
Topic: smoke!!!!!!! lots of it!!!!!
Replies: 18
Views: 9379

Sorry guys, running manual box, smoke bluey grey,ticks over all day no smoke?
cheers,
Tony
by tonydancer8
Mon Aug 06, 2007 8:39 pm
Forum: Engines Area
Topic: smoke!!!!!!! lots of it!!!!!
Replies: 18
Views: 9379

smoke!!!!!!! lots of it!!!!!

Help! bought a sd1 with 3.9, rebuilt? engine. after 300 miles of use, it started to pink and turned day into night behind me!!!!. Ran rough so creeped home. looked for obvious signs and eventually had heads skimed due to very faint maching mark accross oilway into cylinder. Rebuilt but exactly the s...

Go to advanced search