Page 1 of 1
Flapper Inlet manifold water temperature sender
Posted: Sat Apr 26, 2008 7:55 pm
by adamnreeves
As above, the one on the front left hand side. I have been supplied a 3/8 NPT it starts to screw it then stops. I am thinking its probably 3/8UNF ?
Posted: Tue Apr 29, 2008 6:26 pm
by adamnreeves
BTTT
Posted: Tue Apr 29, 2008 7:23 pm
by katanaman
it wont be NPT as none of the threads are, UNC sounds right but I think its larger than 3/8 could be wrong on that though.
Posted: Wed Apr 30, 2008 3:00 pm
by adamnreeves
After my third trip which is about 120 miles! I know have the correct adaptor and can tell you it is 5/8 UNF. I didn't think any of the threads were NPT but it seems all my sensors for the dials/gauge are !
katanaman wrote:it wont be NPT as none of the threads are, UNC sounds right but I think its larger than 3/8 could be wrong on that though.
Posted: Wed Apr 30, 2008 4:29 pm
by katanaman
yes my gauges all came like that as well and I had to use adapters. I couldn't for the life of me remember what size the adapters were though.