Real Steel Tornado cam
Posted: Wed Feb 27, 2008 7:06 pm
Has anyone tried this cam?
Not personally but it's virtually identical to the Crower 50232 in specification.
That cam is said to have a slightly lumpy idle at 1000RPM and not a lot of power until about 3000RPM on a 3.5
I'm using the Crower 50232 in my new engine but thats 4.35 so hoping the extra cc's will soften the characteristics a bit but still give good top end peaking at 5500 but capable of 6500RPM if required.
Kevin