Page 1 of 1

MGB Yellow Poly Front Crossmember Bushes

Posted: Thu Aug 09, 2007 5:24 pm
by tetlow
I have just removed my yellow poly front crossmember bushes and replaced with std ones.
Yep I know they would not have made much difference but I am so pi**ed at driving a Go-Kart that all the suspension is going back to std.(Except for uprated lever arms)

So the reason for this message.

I now have a set of MGB Rubber Bumper Yellow Poly Crossmember Bushes I don't want, in good condition. (2000 miles)

They weigh sod all so anyone who wants them let me know and I will sent them on.

First come first get. :twisted:

Dave

Posted: Thu Aug 09, 2007 7:46 pm
by mgbv8
I'll pick them up when I get the pistons Dave. I'm using a complete B front end in the Fiesta project.

Posted: Thu Aug 09, 2007 7:53 pm
by tetlow
I thought of you but assumed you would be using Red. :D
There yours.

Posted: Thu Aug 09, 2007 8:02 pm
by mgbv8
HE HE!
The Fiesta will run on whatever I can beg or sweep up from someone garage floor Dave.
The only new thing I'm going to buy for the Fiesta is an FIA roll cage and a decent harness mate. And possibly a new crash helmet.
She will be somewhat unpredictable on the track I think!!
300hp RV8 with Nos. Welded Diff. Very stiff front end. rear end probably welded in on 4x2 box section and soft tyres to start with.
Who knows what she will do on the maiden voyage in August 2008????
See you soon
Cheers
Perry