Rover V8 connecting rods and pistons
Posted: Wed Apr 01, 2026 6:53 pm
Good day to you all!
I have some Rover V8 parts that i was trying to definitively identify. I'm hoping someone out there could help me.
I have cast iron connecting rods which have the following cast in them: HRC1037 SDF157. Written in indelible marker is 507. I'm pretty sure these are for either a 3.5 or 3.9L engine but then again i might be wrong!
I have AE pistons which are marked up as AE HRC1828 and 413P and 22059A. On the piston crown is 675 written with an indelible marker plus it is stamped 22059, D06, M6 and Mw. The crown has two machined valve cut outs. its outer diameter is as best as i can measure is 93.35mm. I reckon these are for the 3.9L engine. I'm a bit confused about the valve cut outs which i've not come across on the 3.5 amd 3.9L engine pistons.
Any help you can provide would be gratefully received.
I have some Rover V8 parts that i was trying to definitively identify. I'm hoping someone out there could help me.
I have cast iron connecting rods which have the following cast in them: HRC1037 SDF157. Written in indelible marker is 507. I'm pretty sure these are for either a 3.5 or 3.9L engine but then again i might be wrong!
I have AE pistons which are marked up as AE HRC1828 and 413P and 22059A. On the piston crown is 675 written with an indelible marker plus it is stamped 22059, D06, M6 and Mw. The crown has two machined valve cut outs. its outer diameter is as best as i can measure is 93.35mm. I reckon these are for the 3.9L engine. I'm a bit confused about the valve cut outs which i've not come across on the 3.5 amd 3.9L engine pistons.
Any help you can provide would be gratefully received.