Page 1 of 1
R380 gearbox
Posted: Thu Jun 05, 2014 5:01 pm
by Devonrod
Does anyone have info about R380 gearboxes fitted to LDV vans, do they fit straight on a Rover V8? ive trawled the net and as usual there are conflicting opinions.
Posted: Thu Jun 05, 2014 5:13 pm
by sidecar
The box will fit but first gear is useless as it's a crawler gear.
Posted: Thu Jun 05, 2014 7:04 pm
by ChrisJC
You do need the right bellhousing though to fit the V8.
Chris.
Posted: Fri Jun 06, 2014 6:59 am
by sowen
The pinion is marginally longer on the R380 than the LT77, I don't think it's an issue on the V8, but some engines that orignally had an LT77 it binds on the end of the flywheel. I had to make a thin spacer shim to go between the bellhousing and gearbox for a T16 engine. The selector mechanism sits about 1" further back and the rear mounting is different. Overall length and general size/shape is the same.