Page 1 of 1
Rver SD1 radiator.
Posted: Sun Apr 15, 2012 7:40 pm
by jenand40
I am looking at the possibility of fitting a manual Rover V8 radiator into my Triumph Stag. Could someone please let me know the overall size of the standard SD1 manual radiator and also the distance between the bottom locating studs.
Many thanks.
Posted: Mon Apr 16, 2012 8:12 am
by ged
Hi,
As you can see from the photo there is quite a difference in size.
The SD1's dimensions are approximately (measured with tape)
Width 725mm
Height 470mm
Between bottom mounts 555mm.
Hope this helps.
Ged.
SD1 radiator.
Posted: Mon Apr 16, 2012 5:43 pm
by jenand40
Ged;
Thank you for the info. Looks like I need to do some body mods or look elsewhere.
jenand40