Page 2 of 2
Posted: Fri Jan 25, 2008 6:53 pm
by mgbv8
Dave
I might need one. But I cant remember now?
Mine doesnt have one, and I didnt fit one due to the snap oversteer issue.
Bolt it to the wall in the garage. It will make a nice strong hanging rail eh?
Posted: Fri Jan 25, 2008 7:00 pm
by tetlow
Perry
This bar realy is a piece of s%*t.
The geometry is not right and the bushes are all twisted to hell when under load.
I am not surprised that one of the hex vertical rods broke. (now M8 threaded rod)
If your serious I will put it aside.
Dave
Posted: Fri Jan 25, 2008 7:18 pm
by davemgb
Dave,
I would wait until you drive it a little and see if it settles - I've not know Doug to be wrong.
First time I put new rear springs on a Midget it sat so high you couldn't connect the drop straps, little bit of use and it all settled down.
Dave
Posted: Fri Jan 25, 2008 7:25 pm
by tetlow
Dave
Doug's springs are still under my pillow. I should fit them in the next week or so.
I am sure they will work fine.
Its the poxy ARB that I have removed.
Dave
Posted: Fri Jan 25, 2008 7:27 pm
by mgbv8
I dont need it Dave Ta.