Finally got my rx7 with sd1 in running and driving all i need now is a not sure of correct name but the gear selector stop ie to stop the gear stick flopping about and selecting wrong gear like straight into reverse.
anyone point me in right direction or have one for sale cheers.
gear selector stop needed
Moderator: phpBB2 - Administrators
-
Ian Anderson
- Forum Contributor
- Posts: 2459
- Joined: Sun Nov 19, 2006 9:46 pm
- Location: Edinburgh
Build in a consol and fit a "Ferrari" style billet gear gate piece
Absolute pain to get the correct spacing on the cut outs
On the Gt40 I use a rectangular chut out on ali plate with a lever on the left that I can unclip to allow reverse to get selected. Have to make 2 movements
1) Remove lock out
2) Select Reverse
Then also don't forget to relocate the lock out (Easy as it sticks in my knee!)
Ian
Absolute pain to get the correct spacing on the cut outs
On the Gt40 I use a rectangular chut out on ali plate with a lever on the left that I can unclip to allow reverse to get selected. Have to make 2 movements
1) Remove lock out
2) Select Reverse
Then also don't forget to relocate the lock out (Easy as it sticks in my knee!)
Ian
Owner of an "On the Road" GT40 Replica by DAX powered by 3.9Hotwre Efi, worked over by DJ Motors. EFi Working but still does some kangaroo at low revs (Damn the speed limits) In to paint shop 18/03/08.
-
ian.stewart
- Forum Contributor
- Posts: 2419
- Joined: Sat Nov 18, 2006 1:59 pm
- Location: Far Far south, any further south and my feet are wet
have studied box and tried new bush but not solved, the gearstick has been bent to fit some other car and in turn i think has broken the black plastic housing which i guess covers the selector/holds inbetween 3rd and 4th does anone have one pleaseian.stewart wrote:Can you put a photo up. but there should be a right angle plate on the RH side of the box, held on by 2 bolts on a sort of springy mount?,
si
