Completely ignorant about fuel injection

General Chat About Exhaust, Cylinder Heads, Fuel Systems And Intake

Moderator: phpBB2 - Administrators

Post Reply
ppyvabw
Guru
Guru
Posts: 824
Joined: Sun Jan 07, 2007 5:10 pm
Location: Newbury

Completely ignorant about fuel injection

Post by ppyvabw »

I'm in one of my 'I want to build a new engine' phases.

I would like to use injection but I have absolutely no idea about it at all. I know there is a squirty thing that squirts fuel just behind the valve and theres either throttle bodies, or a plenum chamber with a big buterfly on it, but that's about it.

What different systems are there? If I bought an engine with fuel injected manifold on and what have ya, where would I start in setting it all up. There's loads of sensors and what hav ya?

What is megasquirt? I have seen some threads on here and on the net. Apparently one builds it all oneself, which would be fine because I have done lots of electronics before.

How do I know what manifold is what. I have currently got my eye on a 1992 engine, any idea what system this would be? The engine number is 36D08026, so that makes it discovery EFI (auto), using the engine numbers thread.

Any help greatly appreciated. A brief lesson in EFI would be great :)


User avatar
JSF55
Forum Contributor
Forum Contributor
Posts: 991
Joined: Mon Dec 04, 2006 4:15 pm
Location: Swansea
Contact:

Post by JSF55 »

I suppose the same goes for me, i always wanted to run an injected car, so finally after flogging my carb and manifold and purchasing various efi bits, i'm going to have phil from extra efi build me one, i must have read the site and his cobra build a few times before i finally understood it all, i would have thought the best way for you to go is to rebuild the engine as u wish, inform phil of the build u have and let him recommend a suitable unit, i know i'm not sh!t hot at electronics or soldering , but i seem to have got my head round it all !!
http://www.extraefi.co.uk/
So thats where it went !
User avatar
ChrisJC
Top Dog
Top Dog
Posts: 5077
Joined: Mon Nov 20, 2006 1:13 pm
Location: Northants / Cambs
Contact:

Post by ChrisJC »

The answers to those questions could fill an encyclopedia!!!

There are basically two different types of fuel injection inlet manifold fitted to the RV8. There's the type with the plenum chamber containing eight trumpets, and the very late 'thor' type.

I've got pics of the variants here:

http://www.cowdery.org.uk/miscv8.php
towards the bottom of the page.

All the plenum types are in principle the same thing, they just have different sensors and the like as fuel injection technology moved on.

Have you read the megasquirt / megajolt websites?
http://en.wikipedia.org/wiki/Megasquirt

Chris.
--
Series IIA 4.6 V8
R/R P38 4.6 V8
R/R L405 4.4 SDV8
Post Reply

Return to “Exhaust, Cylinder Heads, Fuel And Intake Area”