The V8 Owners Forum -

Do you have a local land rover dealer you could check? Done: 15-20 working days to have it:oops: One thought, which of the bolts are you missing? If it's one of the shorter outside bolts these are not used on later engines and not required. Tom. Yes, i know about it but unfortunately it is one of t...

yes, absolutely.

The problem is that: I live in Italy and the 7/16 UNC in 10.9/8 class are impossible to find.

I can order it online (i.e, paddockspares) but it is a special order and with the summer the deliver will be to far

And i need to use the RRC for work just few days

Unfortunately are 8.8

Is dangerous use just one 8.8 (the rest of 13 bolts will be the originals) for few time in the head?

Are you sure?

I have got some 7/16 UNC bolts with "8.8" on the top

Hi everyone,
Are the head bolts of a 3.9 V8 (RRC MY 90) are in strenght class 10.9 or 12.9?

Thank you!

It sounds like you have a petrol injector stuck open ( or more correctly, being commanded open permanently) I have had reliability issues with the injector emulators before on my 1991 RRC on LPG - they use relays that can stick - and short out a bank of injectors. Also prone to water ingress. You m...

At this point I hope it is the damaged wiring.

With the noid lamp I can see if the signal does not come to an injector ... or not?

I agree, but if you remember the first post ... I've checked or replaced everything I could. And the car continues to go wrong. If the noid test will say that the wiring is, I have also finished all the tests that you have suggested to me

I just did a little experiment to see if the fuel pressure regulator was good: I disconnected the fuel line after the filter and I did run the pump with rover gauge to see how the fuel flows. Next, i have disconnected the fuel line after the fuel pressure regulator and i did run the pump again and I...

Hi everyone, today I have made others test :? First of all, my hand-made noid lamp (with halogen) doesn't work properly...or i have no injectors that works :lol: For second, on Rover Gauge the MIL now is ON, but i have no errors :x relays looks good :idea: next step is use a led to build another noi...

since i have the range i never touched this relè. It can be the original or not, that's why i have asked for problem on it

Ok, i will use a led

meanwhile, Meanwhile, the main relay can cause problems if it is damaged or not working properly?

Hi,
I have a G4 halogen lamp like this:


(12V 10W)

is it ok to build a noid lamp?

thank you

Ok

just to do it, i will check again the ignition timing